Nalco 8457 -

Answer: Damanjodi refinery.

– Use a field test kit or process photometer. Adjust feed rate to maintain target residual. nalco 8457

| Problem | Possible Cause | Corrective Action | |---------|----------------|--------------------| | High orthophosphate | Overfeed or low blowdown | Reduce feed rate, increase blowdown | | Rising corrosion rates | Underfeed, pH excursion | Check pump calibration, adjust pH | | White phosphate scale | High calcium, high pH (>8.5), overfeed | Lower pH, reduce feed, add polymer | | Copper corrosion | Low azole content, ammonia in water | Verify product integrity, test for ammonia | | Fouled heat exchanger | Poor dispersion, high suspended solids | Increase blowdown, clean then re-passivate | Answer: Damanjodi refinery