: Switch the device on using the rear on/off switch. Initial configuration includes setting the language, temperature format (Celsius/Fahrenheit), and date. Firing Process Select a program using the numeric keypad. Load objects using only the provided tongs to avoid burns. The display shows both the actual value setpoint value during the cycle.
: Open the furnace head, place your object on the firing tray, and position it on the firing table. : Press the ivoclar programat p100 manual english
As of this writing, the official Ivoclar Programat P100 English manual can be obtained directly from Ivoclar’s website (Support → Downloads) or via authorized dental dealers. : Switch the device on using the rear on/off switch
Place the silver rods in the holder and run the test program (typically Program 99 Melted completely : Temperature is too high. : Temperature is too low. Balling on the rod : Temperature is perfect. Load objects using only the provided tongs to avoid burns
: Procedures for cleaning, troubleshooting error messages, and silver-wire calibration. 🛠️ Key Technical Features
A: "Pressing" (Programs P1-P5) uses a slower vacuum ramp to melt ceramic ingots through a plunger. "Firing" (P10-P30) is for layering porcelain. Do not mix them.